icon

LINEAR MECHANICAL GRILL

Equipment that cleans the grid bars from the outside by linear movement in the horizontal direction.

icon

PERFORATED POROUS GRILL

The grill is made up of perforated pallets running in an infinite loop integrated into the chain gear system. Perforated hole diameters can be of various sizes, mostly d5 or d6 mm.

icon

COMPACT GRILL

An alternative to the Perforated Porous Mechanical Grid used for fine grilling in treatment plants, the Compact Grid is provided to remove solid particles larger than 6 mm.

icon

CIRCULAR MECHANICAL GRILL

Circular shaped grill, equipment that cleans the surface of the rods from the outside with a circular moving rake.

icon

MICRO DISK FILTER

At the wastewater and drinking water treatment plant outlet, the micro disk filters are used to increase the quality of the water by providing filter particles bigger than 10 microns.

icon

GRILL PRESS

Wastes held by grills contain high water content in their structure and occupy a large volume. Grid presses have a spiral system that compresses these wastes and reduces their water content and volume. The amount of organic matter in the waste is also reduced by washing.

icon

SAND SEPERATOR

Sand retainers are used to separate inorganic materials such as sand or similar particles. Many of these materials are abrasive in nature, accelerating the wear of surfaces contacted by pumps and other equipment.

icon

MOVING SAND HOLDER BRIDGE

In sandbags, additional materials that can cause clogging in the piping are trapped in the wastewater, together with high density material such as sand or the like which may damage the pump and other mechanical damages.

icon

ROTARY DISK SCREEN

Rotating disc screens are used to separate all solid wastes with a spacing of 150-200 microns from wastewater. They can be manufactured in capacities ranging from 10 m³/h to 285 m³/h. The wastewater works according to the principle of depositing solid matter and fibers on the sieve, coated with 150-200 micron spaced stainless steel sieve grids.

icon

HIGH SPEED MIXER

For using in chemical preparation and other process tanks up to 1000 lt capacity for. High-speed mixers are used in many industries for chemical preparation and treatment.

icon

ROTARY SCREEN

The drum screen operates on the basis that the solid substances contained in the wastewater coming out of the outer stream are kept out of the screen. All solid particles down to 1 mm are separated from wastewater

icon

QUICK MIXER

Rapid mixers used in chemical processes requiring rapid mixing in water and wastewater treatment plants, are designed according to the pool geometry, the viscosity of the fluid and the solubility of the chemical in order to ensure complete mixing.

icon

SLOW MIXER

Slow mixers used in chemical processes that require slow mixing in water and wastewater treatment plants, are designed in accordance with the pool geometry and the expected floc or sediment structure in order to ensure complete mixing.

icon

AERATOR

Designed to provide high efficiency oxygen transfer, the aerator has a mechanical structure consisting of a motor, a drive unit consisting of a motor and a reducer, a body, a shaft and a fan.

icon

ROTARY BRIDGE SCRAPER

The rotary bridle scraper is manufactured for circular sedimentation pools with a diameter of 6 - 48 mm. The bearing center consists of the bearing, the bridge, the scraper arms, the scraper pallets and the drive group.

icon

FIXED BRIDGE SCRAPER

Fixed bridged scraper is manufactured for circular and sloped sedimentation pools with a diameter of Ø10 m. It is operated by mounting a fixed bridge made of reinforced concrete or steel on the pool.

icon

CONDENSER

Condensers are built up to a certain diameter from the center and are designed as rotary bridges in large diameters. The condensers are manufactured to increase the consistency of the mud and at the same time strip the bottom mud to the center.

icon

AUTOMATIC POLYELECTROLYTE PREPARATION UNIT

Automatic Polyelectrolyte Preparing Units are the equipment used to automatically prepare the polyelectrolyte to be used in the sludge dewatering units of the treatment plants.

icon

SPIRAL CONVEYOR

Spiral conveyors are equipment used to transfer grill a taps in treatment plants or where dewatered sludge is removed.

icon

BAND CONVEYOR

Band conveyors are equipment used to transport grid wastes or dewatered sludge at the treatment plants wherever they are removed. It is equipped with an anti-slip mechanism and a visor to prevent the materials transported from being scattered during transportation.

icon

PRESSURE TANKS (SAND / ACTIVE CARBON FILTERS, ION EXCHANGE)

Activated carbon filters improve water taste, odor and color while picking up organic matters and free chlorine in the water. In this system, activated carbon is used as filter material and gravel is used as filling material.

icon

DAF (Dissolved Air Flotation)

The DAF system is used to separate industrial and animal oils and particles from wastewater. The micro bubbles formed in the system are held on the surface of these materials.

icon

PENSTOCKS

The water flow in the channels is controlled by penstocks. According to assembly location, there are two different types: pipe type and wall type.

icon

TELESCOPIC VALVE

The telescopic valve is one of the equipment that controls the water flow.They are used in the sludge collection systems of the treatment plants, deep channels

icon

WASTE / CLEAN READY PUMP STATIONS

These pre-assembled ready pumping stations, specially designed for all your needs, contain all the necessary equipment. Deposition and accumulation of sludge on the bottom of the tank is due to improved geometry, minimum floor area and self-cleaning ability.

icon

SOLID WASTE TECHNOLOGIES

Used to carry out actions regarding solid wastes, such as compaction, cutting, bale, magnetic separator, guidance, sieve used in collection, transfer, storage facilities.

icon

INTEGRATED CLEANING SYSTEM

It is a compact treatment plant designed for biological treatment of domestic wastewater by 50-600 persons. Standardized ventilation, sedimentation, sludge stabilization pool and operating cabin are created according to the population number.

icon

ODOR DISPOSAL UNIT

Odor Removal Systems designed to reduce or completely eliminate odors from wastewater treatment plants, especially from grilling and sand holding units and sludge condensing/bleaching units, all from the industrial production processes.

icon

EXISTING TREATMENT FACILITIES OPERATION MAINTENANCE, SERVICE, REPAIR AND SPARE PART SUPPLY

Maintenance services related to the productions in the treatment plants operating in Turkmenistan in general, fault detection and repair services, and replacement of spare parts of the equipment, if necessary, can be done within the manufacturing facility.

icon

LABORATORY DEPARTMENT

There are Chemistry Laboratory and Biological Laboratory Rooms for laboratories analysis that should be done for Drinking Water and Wastewater Treatment Plants in the Manufacturing Building Administrative Building.

loader